tirsdag 26. februar 2013


OpenWRT for N2 & N5


*  File list: openwrt-alfa-nx-jffs2-sysupgrade.bin
       (This is for upgrading from terminal console, and you can download it from  Alfa Network's download section )

* Console Cable Kit from Alfa Network. 
 Environment : windows XP with procomm( I already setup for Aviv)
            PC IP address :
            TFTP server

*   Steps summary:
-   PCBA/console board setup
-   Upgrade firmware from terminal console
-   Run the CTLPower utility

1.      Baudrate is 115200 8N1
PCBA & console board configuration

2.      Open the terminal console program, boot up N2 PCBA & press 2

3.      After N2 PCBA is reboot, press 2 when you see ‘choose the operation’
Are you sure?(Y/N) Y(enter)
Input device IP( ==: (enter)
Input server IP( ==: (enter)
// for my case, I set windows xp PC’s IP address as
Input image filename () ==: openwrt-alfa-nx-jffs2-sysupgrade.bin (Enter)

4.      Wait the process finished

5.      After the process finished, it will reboot again
 Next, switch the RJ45 cable to LAN port

6.       OK…everything is done.

Ingen kommentarer:

Legg inn en kommentar