Alfa Network www.alfanetwork.no AIP-W512 802.11N 150Mbps Wireless Cube Router (AIP-W512)

How to secure and install your router! 

First connect your network cable from the modem/vdsl router from LAN to AIP-W512 WAN port. 

Connect your router to your laptop either with network cable or wifi signals. <From LAN port> If you choose WIFI - connect to 11n AP SSID as shown below.

 

First step - Log into your admin panel by typing 192.168.11.1

User name: Admin

Password: Admin

Second step - Press on wireless and then sub menu Basic Settings!

Then write your SSID ( Network name of choise) in the SSID box.

  Then press APPLY Changes on the bottom! 

Then press Reboot later

 

Then you go the sub menu on the left side, and choose Security. 

- Choose WPA2 from the dropdown menu Encryption. 

- Pre Shared key is the password, choose a strong password with numbers and letters. 

 

 Then press Apply changes before you choose Reboot Later again in the next picture. 

Go down to Management in the left menu to choose your admin panel passord. 

Choose password and confirm password, and then apply changes and reboot.

You WIFI router is now set up with security.  After this you must connect to the new WIFI SSID name with password in order to connect this router to the internet.