2.11.2014
VLAN Setting
Apply Model: N2, N2C, N2s, N5, N5C and Tube2H
Note: VLAN only work in WDS mode
WPS AP
WDS STA
Ping from PC1 to WDS AP, WDS STA, PC2's VID 10 and PC2's VID 20
Apply Model: N2, N2C, N2s, N5, N5C and Tube2H
Note: VLAN only work in WDS mode
SWITCH:
Port1 Management VLAN 100
Port2 untagged VLAN 10
Port3 untagged VLAN 20
Port8 VLAN trunk, tagged VID 100,10,20
PC1:
OS Windows XP
Ethernet 1.onboard(eth0): 192.168.100.1, connect to port1
2.USB2ETH(eth1): 192.168.10.1, connect to port2
3.USB2ETH(eth2): 192.168.20.1, connect to port3
PC2:
OS Linux(Ubuntu 12.04)
Ethernet use vconfig to create vlan interfaces eth0.10 and eth0.20
1. eth0.10: 192.168.10.2
2. eth0.20: 192.168.20.2
WDS AP: (N5 board)
Mode AP bridge mode
IP address 192.168.100.51
VLAN enable Management VLAN and VID is 100
VLAN group add 3 VLAN ID 100, 10 ,20, 101 on eth0, eth1 and SSID1
WDS STA: (N5 board)
Mode client bridge and WDS enabled
IP address 192.168.100.52
VLAN enable Management VLAN and VID is 100
VLAN group add 3 VLAN ID 100, 10 , 20, 101 on eth0, eth1 and SSID1
WPS AP
192.168.100.51
WDS STA
192.168.100.52
Ping from PC1 to WDS AP, WDS STA, PC2's VID 10 and PC2's VID 20
Ingen kommentarer:
Legg inn en kommentar